[ 0.000000] microcode: microcode updated early to revision 0x5e, date = 2017-04-06 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0 [ 0.000000] Linux version 4.13.0-19-generic (buildd@lcy01-amd64-021) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #22-Ubuntu SMP Mon Dec 4 11:58:07 UTC 2017 (Ubuntu 4.13.0-19.22-generic 4.13.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-19-generic root=UUID=54bf5658-0cd0-41a6-b9ed-b7f6b2f1d415 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c3515fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c3516000-0x00000000c3516fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c3517000-0x00000000c3517fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c3518000-0x00000000c9da8fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c9da9000-0x00000000ca10efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ca10f000-0x00000000ca27cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca27d000-0x00000000ca927fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ca928000-0x00000000caefefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000caeff000-0x00000000caefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000caf00000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B250M-D3H/B250M-D3H-CF, BIOS F4 02/21/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x82f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CC000000 mask 7FFC000000 uncachable [ 0.000000] 3 base 00CB800000 mask 7FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xcaf00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcc60-0x000fcc6f] mapped at [ffff8e3c800fcc60] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8e3c80096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x38b723000, 0x38b723fff] PGTABLE [ 0.000000] BRK [0x38b724000, 0x38b724fff] PGTABLE [ 0.000000] BRK [0x38b725000, 0x38b725fff] PGTABLE [ 0.000000] BRK [0x38b726000, 0x38b726fff] PGTABLE [ 0.000000] BRK [0x38b727000, 0x38b727fff] PGTABLE [ 0.000000] BRK [0x38b728000, 0x38b728fff] PGTABLE [ 0.000000] BRK [0x38b729000, 0x38b729fff] PGTABLE [ 0.000000] BRK [0x38b72a000, 0x38b72afff] PGTABLE [ 0.000000] BRK [0x38b72b000, 0x38b72bfff] PGTABLE [ 0.000000] BRK [0x38b72c000, 0x38b72cfff] PGTABLE [ 0.000000] BRK [0x38b72d000, 0x38b72dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31f35000-0x34f91fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000CA57D0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000CA5A3A08 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000CA57D1F0 026818 (v02 ALASKA A M I 01072009 INTL 20160422) [ 0.000000] ACPI: FACS 0x00000000CA927C40 000040 [ 0.000000] ACPI: APIC 0x00000000CA5A3B20 0000BC (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000CA5A3BE0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000CA5A3C28 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: FIDT 0x00000000CA5A3C68 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000CA5A3D08 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA5A6E60 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.000000] ACPI: HPET 0x00000000CA5A93A8 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000CA5A93E0 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA5AA220 002AD7 (v02 INTEL xh_rvp10 00000000 INTL 20160422) [ 0.000000] ACPI: UEFI 0x00000000CA5ACCF8 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000CA5ACD40 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: LPIT 0x00000000CA5ADC20 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) [ 0.000000] ACPI: WSMT 0x00000000CA5ADCB8 000028 (v01 INTEL KBL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000CA5ADCE0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA5ADF80 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.000000] ACPI: DBGP 0x00000000CA5B0F88 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000CA5B0FC0 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: DMAR 0x00000000CA5B1018 0000A8 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000082effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x82efd5000-0x82effffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000082effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c3515fff] [ 0.000000] node 0: [mem 0x00000000c3518000-0x00000000c9da8fff] [ 0.000000] node 0: [mem 0x00000000ca10f000-0x00000000ca27cfff] [ 0.000000] node 0: [mem 0x00000000caeff000-0x00000000caefffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000082effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000082effffff] [ 0.000000] On node 0 totalpages: 8359601 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12861 pages used for memmap [ 0.000000] DMA32 zone: 823062 pages, LIFO batch:31 [ 0.000000] Normal zone: 117696 pages used for memmap [ 0.000000] Normal zone: 7532544 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000cc000000-0x00000000cfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc3516000-0xc3516fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc3517000-0xc3517fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9da9000-0xca10efff] [ 0.000000] PM: Registered nosave memory: [mem 0xca27d000-0xca927fff] [ 0.000000] PM: Registered nosave memory: [mem 0xca928000-0xcaefefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcaf00000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8e44aec00000 s119704 r8192 d31848 u262144 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8228959 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-19-generic root=UUID=54bf5658-0cd0-41a6-b9ed-b7f6b2f1d415 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32775372K/33438404K available (9294K kernel code, 2479K rwdata, 3996K rodata, 2324K init, 2384K bss, 663032K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37783 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] tsc: Detected 4200.000 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 8400.00 BogoMIPS (lpj=16800000) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.023036] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.023053] Security Framework initialized [ 0.023055] Yama: becoming mindful. [ 0.023068] AppArmor: AppArmor initialized [ 0.026081] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.027543] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.027592] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.027639] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.027743] CPU: Physical Processor ID: 0 [ 0.027745] CPU: Processor Core ID: 0 [ 0.027751] mce: CPU supports 10 MCE banks [ 0.027757] CPU0: Thermal monitoring enabled (TM1) [ 0.027769] process: using mwait in idle threads [ 0.027772] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.027774] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.027915] Freeing SMP alternatives memory: 36K [ 0.028637] smpboot: Max logical packages: 2 [ 0.028643] DMAR: Host address width 39 [ 0.028645] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.028649] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.028652] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.028655] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.028658] DMAR: RMRR base: 0x000000ca071000 end: 0x000000ca090fff [ 0.028660] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cfffffff [ 0.028663] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.028665] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.028666] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.029988] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.029990] x2apic enabled [ 0.030000] Switched APIC routing to cluster x2apic. [ 0.033966] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.073682] TSC deadline timer enabled [ 0.073687] smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9) [ 0.073721] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.073739] ... version: 4 [ 0.073741] ... bit width: 48 [ 0.073742] ... generic registers: 4 [ 0.073744] ... value mask: 0000ffffffffffff [ 0.073746] ... max period: 00007fffffffffff [ 0.073748] ... fixed-purpose events: 3 [ 0.073749] ... event mask: 000000070000000f [ 0.073770] Hierarchical SRCU implementation. [ 0.074215] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.074224] smp: Bringing up secondary CPUs ... [ 0.074257] x86: Booting SMP configuration: [ 0.074259] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.076980] smp: Brought up 1 node, 8 CPUs [ 0.076980] smpboot: Total of 8 processors activated (67200.00 BogoMIPS) [ 0.080503] devtmpfs: initialized [ 0.080503] x86/mm: Memory block size: 128MB [ 0.081131] evm: security.selinux [ 0.081133] evm: security.SMACK64 [ 0.081135] evm: security.SMACK64EXEC [ 0.081136] evm: security.SMACK64TRANSMUTE [ 0.081138] evm: security.SMACK64MMAP [ 0.081140] evm: security.ima [ 0.081141] evm: security.capability [ 0.081149] PM: Registering ACPI NVS region [mem 0xc3516000-0xc3516fff] (4096 bytes) [ 0.081149] PM: Registering ACPI NVS region [mem 0xca27d000-0xca927fff] (6991872 bytes) [ 0.081149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.081149] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.081149] pinctrl core: initialized pinctrl subsystem [ 0.081149] RTC time: 19:08:53, date: 12/19/17 [ 0.081149] NET: Registered protocol family 16 [ 0.081149] cpuidle: using governor ladder [ 0.081149] cpuidle: using governor menu [ 0.081149] PCCT header not found. [ 0.081149] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.081149] ACPI: bus type PCI registered [ 0.081149] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.081149] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.081149] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.081149] PCI: Using configuration type 1 for base access [ 0.081149] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.081149] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.081149] ACPI: Added _OSI(Module Device) [ 0.081149] ACPI: Added _OSI(Processor Device) [ 0.081149] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.081149] ACPI: Added _OSI(Processor Aggregator Device) [ 0.084070] ACPI: Executed 35 blocks of module-level executable AML code [ 0.089557] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.090014] ACPI: Dynamic OEM Table Load: [ 0.090014] ACPI: SSDT 0xFFFF8E448E133000 00081F (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.090014] ACPI: Executed 1 blocks of module-level executable AML code [ 0.090014] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.092662] ACPI: Dynamic OEM Table Load: [ 0.092667] ACPI: SSDT 0xFFFF8E448A039400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.092742] ACPI: Executed 1 blocks of module-level executable AML code [ 0.092788] ACPI: Dynamic OEM Table Load: [ 0.092788] ACPI: SSDT 0xFFFF8E448A4E0800 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.092788] ACPI: Executed 1 blocks of module-level executable AML code [ 0.092788] ACPI: Dynamic OEM Table Load: [ 0.092788] ACPI: SSDT 0xFFFF8E448A1DB000 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.092788] ACPI: Executed 1 blocks of module-level executable AML code [ 0.094169] ACPI: Interpreter enabled [ 0.094195] ACPI: (supports S0 S3 S4 S5) [ 0.094197] ACPI: Using IOAPIC for interrupt routing [ 0.094219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.094775] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.097309] ACPI: Power Resource [PG00] (on) [ 0.097489] ACPI: Power Resource [PG01] (on) [ 0.097663] ACPI: Power Resource [PG02] (on) [ 0.099617] ACPI: Power Resource [WRST] (on) [ 0.099800] ACPI: Power Resource [WRST] (on) [ 0.099979] ACPI: Power Resource [WRST] (on) [ 0.100165] ACPI: Power Resource [WRST] (on) [ 0.100342] ACPI: Power Resource [WRST] (on) [ 0.100520] ACPI: Power Resource [WRST] (on) [ 0.100697] ACPI: Power Resource [WRST] (on) [ 0.100876] ACPI: Power Resource [WRST] (on) [ 0.101052] ACPI: Power Resource [WRST] (on) [ 0.101231] ACPI: Power Resource [WRST] (on) [ 0.101409] ACPI: Power Resource [WRST] (on) [ 0.101591] ACPI: Power Resource [WRST] (on) [ 0.101769] ACPI: Power Resource [WRST] (on) [ 0.101948] ACPI: Power Resource [WRST] (on) [ 0.102124] ACPI: Power Resource [WRST] (on) [ 0.102302] ACPI: Power Resource [WRST] (on) [ 0.102479] ACPI: Power Resource [WRST] (on) [ 0.103150] ACPI: Power Resource [WRST] (on) [ 0.103329] ACPI: Power Resource [WRST] (on) [ 0.103505] ACPI: Power Resource [WRST] (on) [ 0.111275] ACPI: Power Resource [FN00] (off) [ 0.111319] ACPI: Power Resource [FN01] (off) [ 0.111360] ACPI: Power Resource [FN02] (off) [ 0.111402] ACPI: Power Resource [FN03] (off) [ 0.111443] ACPI: Power Resource [FN04] (off) [ 0.112081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.112087] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.112106] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.112501] PCI host bridge to bus 0000:00 [ 0.112504] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.112506] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.112508] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.112511] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window] [ 0.112514] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.112517] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.112523] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000 [ 0.112708] pci 0000:00:02.0: [8086:5912] type 00 class 0x030000 [ 0.112714] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.112717] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.112719] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.112807] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.112814] pci 0000:00:08.0: reg 0x10: [mem 0xf704e000-0xf704efff 64bit] [ 0.112914] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 [ 0.112930] pci 0000:00:14.0: reg 0x10: [mem 0xf7030000-0xf703ffff 64bit] [ 0.112979] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.113106] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 [ 0.113126] pci 0000:00:16.0: reg 0x10: [mem 0xf704d000-0xf704dfff 64bit] [ 0.113181] pci 0000:00:16.0: PME# supported from D3hot [ 0.113272] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 [ 0.113285] pci 0000:00:17.0: reg 0x10: [mem 0xf7048000-0xf7049fff] [ 0.113290] pci 0000:00:17.0: reg 0x14: [mem 0xf704c000-0xf704c0ff] [ 0.113295] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.113300] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.113305] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.113310] pci 0000:00:17.0: reg 0x24: [mem 0xf704b000-0xf704b7ff] [ 0.113338] pci 0000:00:17.0: PME# supported from D3hot [ 0.113416] pci 0000:00:1b.0: [8086:a2eb] type 01 class 0x060400 [ 0.113469] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.113553] pci 0000:00:1c.0: [8086:a294] type 01 class 0x060400 [ 0.113604] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.113715] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 [ 0.113760] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.113846] pci 0000:00:1d.2: [8086:a29a] type 01 class 0x060400 [ 0.113891] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold [ 0.113975] pci 0000:00:1d.3: [8086:a29b] type 01 class 0x060400 [ 0.114019] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold [ 0.114118] pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100 [ 0.114278] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 [ 0.114290] pci 0000:00:1f.2: reg 0x10: [mem 0xf7044000-0xf7047fff] [ 0.114401] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 [ 0.114424] pci 0000:00:1f.3: reg 0x10: [mem 0xf7040000-0xf7043fff 64bit] [ 0.114450] pci 0000:00:1f.3: reg 0x20: [mem 0xf7020000-0xf702ffff 64bit] [ 0.114489] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.114602] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 [ 0.114661] pci 0000:00:1f.4: reg 0x10: [mem 0xf704a000-0xf704a0ff 64bit] [ 0.114730] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.114876] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 [ 0.114897] pci 0000:00:1f.6: reg 0x10: [mem 0xf7000000-0xf701ffff] [ 0.114987] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.115079] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.115123] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.115164] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.115203] pci 0000:00:1d.2: PCI bridge to [bus 04] [ 0.115255] pci 0000:05:00.0: [1283:8892] type 01 class 0x060401 [ 0.115362] pci 0000:05:00.0: supports D1 D2 [ 0.115362] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115409] pci 0000:00:1d.3: PCI bridge to [bus 05-06] [ 0.115508] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.116832] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.116865] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.116896] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.116927] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.116958] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.116989] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.117019] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.117050] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.117404] SCSI subsystem initialized [ 0.117412] libata version 3.00 loaded. [ 0.117412] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.117412] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.117412] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.117412] vgaarb: loaded [ 0.117412] ACPI: bus type USB registered [ 0.117412] usbcore: registered new interface driver usbfs [ 0.117412] usbcore: registered new interface driver hub [ 0.117412] usbcore: registered new device driver usb [ 0.117412] EDAC MC: Ver: 3.0.0 [ 0.117412] PCI: Using ACPI for IRQ routing [ 0.123899] PCI: pci_cache_line_size set to 64 bytes [ 0.123931] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 0.123931] e820: reserve RAM buffer [mem 0xc3516000-0xc3ffffff] [ 0.123932] e820: reserve RAM buffer [mem 0xc9da9000-0xcbffffff] [ 0.123932] e820: reserve RAM buffer [mem 0xca27d000-0xcbffffff] [ 0.123933] e820: reserve RAM buffer [mem 0xcaf00000-0xcbffffff] [ 0.123933] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff] [ 0.123970] NetLabel: Initializing [ 0.123972] NetLabel: domain hash size = 128 [ 0.123973] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.123982] NetLabel: unlabeled traffic allowed by default [ 0.124066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.124070] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.126112] clocksource: Switched to clocksource hpet [ 0.129161] VFS: Disk quotas dquot_6.6.0 [ 0.129171] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.129220] AppArmor: AppArmor Filesystem Enabled [ 0.129237] pnp: PnP ACPI init [ 0.129373] system 00:00: [io 0x0a00-0x0a2f] has been reserved [ 0.129376] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 0.129378] system 00:00: [io 0x0a40-0x0a4f] has been reserved [ 0.129381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.129685] pnp 00:01: [dma 0 disabled] [ 0.129770] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.130031] pnp 00:02: [dma 0 disabled] [ 0.130048] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.130117] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.130120] system 00:03: [io 0xffff] has been reserved [ 0.130122] system 00:03: [io 0xffff] has been reserved [ 0.130124] system 00:03: [io 0xffff] has been reserved [ 0.130126] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.130128] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.130131] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130178] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.130180] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130189] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.130205] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.130207] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.130314] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.130317] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.130319] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.130321] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.130323] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.130325] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.130327] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.130329] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.130331] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.130334] system 00:07: [mem 0xf7fe0000-0xf7ffffff] has been reserved [ 0.130336] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130354] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.130356] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.130358] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.130360] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.130362] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.130364] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.130367] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.130369] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130531] system 00:09: [io 0xff00-0xfffe] has been reserved [ 0.130534] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131134] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.131136] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.131138] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.131141] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131600] pnp: PnP ACPI: found 11 devices [ 0.138520] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.138554] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.138561] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.138568] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.138575] pci 0000:00:1d.2: PCI bridge to [bus 04] [ 0.138581] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.138598] pci 0000:00:1d.3: PCI bridge to [bus 05-06] [ 0.138605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.138606] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.138606] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.138607] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff window] [ 0.138607] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.138680] NET: Registered protocol family 2 [ 0.138784] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.138955] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.139031] TCP: Hash tables configured (established 262144 bind 65536) [ 0.139054] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.139103] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.139158] NET: Registered protocol family 1 [ 0.139165] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.140088] PCI: CLS 64 bytes, default 64 [ 0.140104] Unpacking initramfs... [ 0.561875] Freeing initrd memory: 49524K [ 0.561943] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.561946] software IO TLB [mem 0xc5da9000-0xc9da9000] (64MB) mapped at [ffff8e3d45da9000-ffff8e3d49da8fff] [ 0.562146] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns [ 0.562336] Scanning for low memory corruption every 60 seconds [ 0.562564] audit: initializing netlink subsys (disabled) [ 0.562627] audit: type=2000 audit(1513710533.562:1): state=initialized audit_enabled=0 res=1 [ 0.562821] Initialise system trusted keyrings [ 0.562828] Key type blacklist registered [ 0.562878] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.563395] zbud: loaded [ 0.563577] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.563685] fuse init (API version 7.26) [ 0.566130] Key type asymmetric registered [ 0.566132] Asymmetric key parser 'x509' registered [ 0.566148] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.566204] io scheduler noop registered [ 0.566205] io scheduler deadline registered [ 0.566218] io scheduler cfq registered (default) [ 0.566782] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.566784] vesafb: scrolling: redraw [ 0.566786] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.566792] vesafb: framebuffer at 0xe0000000, mapped to 0xffff9bd0c3c00000, using 1216k, total 1216k [ 0.583046] Console: switching to colour frame buffer device 80x30 [ 0.599736] fb0: VESA VGA frame buffer device [ 0.600099] intel_idle: MWAIT substates: 0x142120 [ 0.600100] intel_idle: v0.4.1 model 0x9E [ 0.600359] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.600426] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.601078] ACPI: Sleep Button [SLPB] [ 0.601373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.623049] ACPI: Power Button [PWRB] [ 0.633716] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.655326] ACPI: Power Button [PWRF] [ 0.724379] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.804151] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.815326] ACPI: Thermal Zone [TZ00] (28 C) [ 0.826412] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.837564] ACPI: Thermal Zone [TZ01] (30 C) [ 0.848634] GHES: HEST is not enabled! [ 0.859732] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.891758] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.916025] Linux agpgart interface v0.103 [ 0.928673] loop: module loaded [ 0.939888] libphy: Fixed MDIO Bus: probed [ 0.951157] tun: Universal TUN/TAP device driver, 1.6 [ 0.962493] PPP generic driver version 2.4.2 [ 0.973771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.973772] ehci-pci: EHCI PCI platform driver [ 0.973776] ehci-platform: EHCI generic platform driver [ 0.973779] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.973780] ohci-pci: OHCI PCI platform driver [ 0.973783] ohci-platform: OHCI generic platform driver [ 0.973785] uhci_hcd: USB Universal Host Controller Interface driver [ 0.973862] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.973865] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.974934] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.974936] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.974998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.974999] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.974999] usb usb1: Product: xHCI Host Controller [ 0.975000] usb usb1: Manufacturer: Linux 4.13.0-19-generic xhci-hcd [ 0.975000] usb usb1: SerialNumber: 0000:00:14.0 [ 0.975072] hub 1-0:1.0: USB hub found [ 0.975082] hub 1-0:1.0: 12 ports detected [ 0.975634] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.975635] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.975649] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.975650] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.975650] usb usb2: Product: xHCI Host Controller [ 0.975650] usb usb2: Manufacturer: Linux 4.13.0-19-generic xhci-hcd [ 0.975651] usb usb2: SerialNumber: 0000:00:14.0 [ 0.975713] hub 2-0:1.0: USB hub found [ 0.975719] hub 2-0:1.0: 6 ports detected [ 0.976113] i8042: PNP: No PS/2 controller found. [ 0.976190] mousedev: PS/2 mouse device common for all mice [ 0.976414] rtc_cmos 00:05: RTC can wake from S4 [ 0.976821] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.976900] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.976907] i2c /dev entries driver [ 0.976931] device-mapper: uevent: version 1.0.3 [ 0.977017] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.977019] intel_pstate: Intel P-state driver initializing [ 1.008293] intel_pstate: HWP enabled [ 1.304094] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.426682] ledtrig-cpu: registered to indicate activity on CPUs [ 1.437190] NET: Registered protocol family 10 [ 1.447755] usb 1-2: New USB device found, idVendor=18d1, idProduct=4ee7 [ 1.450036] Segment Routing with IPv6 [ 1.450045] NET: Registered protocol family 17 [ 1.450050] Key type dns_resolver registered [ 1.487989] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.498457] usb 1-2: Product: Moto G5 [ 1.508592] usb 1-2: Manufacturer: motorola [ 1.518471] usb 1-2: SerialNumber: ZY3224PJJ9 [ 1.528749] RAS: Correctable Errors collector initialized. [ 1.538561] microcode: sig=0x906e9, pf=0x2, revision=0x5e [ 1.548563] microcode: Microcode Update Driver: v2.2. [ 1.548567] sched_clock: Marking stable (1548558642, 0)->(1553026051, -4467409) [ 1.577846] clocksource: Switched to clocksource tsc [ 1.588059] registered taskstats version 1 [ 1.598245] Loading compiled-in X.509 certificates [ 1.609581] Loaded X.509 cert 'Build time autogenerated kernel key: bb9f2adf4533cce516ad8afef0231093efa8e8d6' [ 1.630509] zswap: loaded using pool lzo/zbud [ 1.642374] Key type big_key registered [ 1.647993] usb 1-3: new full-speed USB device number 3 using xhci_hcd [ 1.663309] Key type trusted registered [ 1.674802] Key type encrypted registered [ 1.685203] AppArmor: AppArmor sha1 policy hashing enabled [ 1.695544] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.705992] evm: HMAC attrs: 0x1 [ 1.716765] Magic number: 13:545:142 [ 1.726917] acpi INT3472:08: hash matches [ 1.736933] acpi device:13: hash matches [ 1.746869] rtc_cmos 00:05: setting system clock to 2017-12-19 19:08:55 UTC (1513710535) [ 1.766614] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.776821] EDD information not available. [ 1.786914] PM: Hibernation image not present or could not be loaded. [ 1.788103] Freeing unused kernel memory: 2324K [ 1.798207] Write protecting the kernel read-only data: 14336k [ 1.798473] usb 1-3: New USB device found, idVendor=0a5c, idProduct=21e8 [ 1.798474] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.798474] usb 1-3: Product: BCM20702A0 [ 1.798475] usb 1-3: Manufacturer: Broadcom Corp [ 1.798475] usb 1-3: SerialNumber: 000272C631C8 [ 1.859769] Freeing unused kernel memory: 932K [ 1.869851] Freeing unused kernel memory: 100K [ 1.880154] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.920000] usb 1-4: new high-speed USB device number 4 using xhci_hcd [ 1.940957] hidraw: raw HID events driver (C) Jiri Kosina [ 1.959773] pps_core: LinuxPPS API ver. 1 registered [ 1.969173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.969221] ahci 0000:00:17.0: version 3.0 [ 1.979456] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.979457] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 2.028838] PTP clock support registered [ 2.039548] scsi host0: ahci [ 2.049804] scsi host1: ahci [ 2.059702] scsi host2: ahci [ 2.069700] scsi host3: ahci [ 2.079117] scsi host4: ahci [ 2.088004] scsi host5: ahci [ 2.096508] ata1: SATA max UDMA/133 abar m2048@0xf704b000 port 0xf704b100 irq 123 [ 2.096642] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.096642] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.105546] usb 1-4: New USB device found, idVendor=0e8d, idProduct=1806 [ 2.105547] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.105547] usb 1-4: Product: MT1887 [ 2.105548] usb 1-4: Manufacturer: MediaTek Inc [ 2.105548] usb 1-4: SerialNumber: R8X76YAG7001D9 [ 2.176922] ata2: SATA max UDMA/133 abar m2048@0xf704b000 port 0xf704b180 irq 123 [ 2.195607] ata3: SATA max UDMA/133 abar m2048@0xf704b000 port 0xf704b200 irq 123 [ 2.214792] ata4: SATA max UDMA/133 abar m2048@0xf704b000 port 0xf704b280 irq 123 [ 2.227992] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 2.234451] AVX2 version of gcm_enc/dec engaged. [ 2.234451] AES CTR mode by8 optimization enabled [ 2.264411] ata5: SATA max UDMA/133 abar m2048@0xf704b000 port 0xf704b300 irq 123 [ 2.283793] ata6: SATA max UDMA/133 abar m2048@0xf704b000 port 0xf704b380 irq 123 [ 2.303416] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.369469] usb 1-7: New USB device found, idVendor=046d, idProduct=c332 [ 2.380451] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.391723] usb 1-7: Product: Gaming Mouse G502 [ 2.403170] usb 1-7: Manufacturer: Logitech [ 2.414772] usb 1-7: SerialNumber: 028C36773837 [ 2.544037] usb 1-8: new full-speed USB device number 6 using xhci_hcd [ 2.566851] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 2.616275] ata4: SATA link down (SStatus 4 SControl 300) [ 2.616290] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.616302] ata6: SATA link down (SStatus 4 SControl 300) [ 2.616316] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.616326] ata3: SATA link down (SStatus 4 SControl 300) [ 2.616818] ata2.00: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133 [ 2.616819] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.617388] ata2.00: configured for UDMA/133 [ 2.617884] ata1.00: supports DRM functions and may not be fully accessible [ 2.617986] ata5: SATA link down (SStatus 4 SControl 300) [ 2.618495] ata1.00: disabling queued TRIM support [ 2.618496] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 2.618496] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.620372] ata1.00: supports DRM functions and may not be fully accessible [ 2.620994] ata1.00: disabling queued TRIM support [ 2.622540] ata1.00: configured for UDMA/133 [ 2.622684] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 2.658772] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 1c:1b:0d:ca:f9:ee [ 2.658773] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.658825] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 2.677743] [drm] Memory usable by graphics device = 4096M [ 2.677744] checking generic (e0000000 130000) vs hw (e0000000 10000000) [ 2.677744] fb: switching to inteldrmfb from VESA VGA [ 2.687437] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 2.703259] usb 1-8: New USB device found, idVendor=0853, idProduct=0100 [ 2.703260] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.703261] usb 1-8: Product: HHKB Professional [ 2.703261] usb 1-8: Manufacturer: Topre Corporation [ 2.820047] usb 1-10: new high-speed USB device number 7 using xhci_hcd [ 2.946180] Console: switching to colour dummy device 80x25 [ 2.946315] [drm] Replacing VGA console driver [ 2.952960] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.952964] [drm] Driver supports precise vblank timestamp query. [ 2.960467] usb 1-10: New USB device found, idVendor=03f0, idProduct=5c17 [ 2.960471] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.960474] usb 1-10: Product: HP LaserJet P2055x [ 2.960476] usb 1-10: Manufacturer: Hewlett-Packard [ 2.960478] usb 1-10: SerialNumber: SK631DV [ 2.963564] usb-storage 1-4:1.0: USB Mass Storage device detected [ 2.963608] scsi host6: usb-storage 1-4:1.0 [ 2.963643] usbcore: registered new interface driver usb-storage [ 2.966175] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.966315] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1) [ 2.967213] usbcore: registered new interface driver usbhid [ 2.967216] usbhid: USB HID core driver [ 2.968937] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C332.0001/input/input3 [ 2.969019] hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-7/input0 [ 2.969192] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C332.0002/input/input4 [ 2.969250] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 2.970607] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.971225] acpi device:0f: registered as cooling_device13 [ 2.971271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 2.988266] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.988350] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.988355] scsi 1:0:0:0: Direct-Access ATA WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5 [ 2.988371] sd 0:0:0:0: [sda] Write Protect is off [ 2.988374] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.988427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.991582] sda: sda1 sda2 [ 2.992196] sd 0:0:0:0: [sda] supports TCG Opal [ 2.992199] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.028192] hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:14.0-7/input1 [ 3.028264] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:0853:0100.0003/input/input6 [ 3.060257] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.060479] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.060495] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.060529] sd 1:0:0:0: [sdb] Write Protect is off [ 3.060532] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.060829] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.088441] hid-generic 0003:0853:0100.0003: input,hidraw2: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-8/input0 [ 3.335702] fbcon: inteldrmfb (fb0) is primary device [ 3.391148] Console: switching to colour frame buffer device 240x67 [ 3.409806] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.583340] sdb: sdb1 [ 3.583983] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.880042] raid6: sse2x1 gen() 15959 MB/s [ 3.928037] raid6: sse2x1 xor() 11550 MB/s [ 3.976035] raid6: sse2x2 gen() 19663 MB/s [ 4.024035] raid6: sse2x2 xor() 13313 MB/s [ 4.072041] raid6: sse2x4 gen() 22766 MB/s [ 4.120035] raid6: sse2x4 xor() 13476 MB/s [ 4.168029] raid6: avx2x1 gen() 32126 MB/s [ 4.216027] raid6: avx2x1 xor() 22055 MB/s [ 4.264029] raid6: avx2x2 gen() 39156 MB/s [ 4.312032] raid6: avx2x2 xor() 24330 MB/s [ 4.360029] raid6: avx2x4 gen() 44193 MB/s [ 4.408029] raid6: avx2x4 xor() 23589 MB/s [ 4.408037] raid6: using algorithm avx2x4 gen() 44193 MB/s [ 4.408047] raid6: .... xor() 23589 MB/s, rmw enabled [ 4.408069] raid6: using avx2x2 recovery algorithm [ 4.408649] xor: automatically using best checksumming function avx [ 4.409122] async_tx: api initialized (async) [ 4.411290] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208DB MF00 PQ: 0 ANSI: 0 [ 4.421381] sr 6:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.421401] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.421540] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 4.421574] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 4.427063] Btrfs loaded, crc32c=crc32c-intel [ 4.704182] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.784705] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.787907] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 4.788652] systemd[1]: Detected architecture x86-64. [ 4.791411] systemd[1]: Set hostname to . [ 4.796335] [drm] RC6 on [ 4.842391] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.844058] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.845640] systemd[1]: Listening on LVM2 metadata daemon socket. [ 4.847655] systemd[1]: Created slice System Slice. [ 4.849528] systemd[1]: Mounting POSIX Message Queue File System... [ 4.851518] systemd[1]: Mounting RPC Pipe File System... [ 4.853411] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.862477] RPC: Registered named UNIX socket transport module. [ 4.862477] RPC: Registered udp transport module. [ 4.862478] RPC: Registered tcp transport module. [ 4.862478] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.872034] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.883912] lp: driver loaded but no devices found [ 4.886110] ppdev: user-space parallel port driver [ 4.888242] parport_pc 00:01: reported by Plug and Play ACPI [ 4.888280] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP] [ 4.938774] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.957546] systemd-journald[476]: Received request to flush runtime journal from PID 1 [ 4.988251] lp0: using parport0 (interrupt-driven). [ 4.988980] random: crng init done [ 4.992883] Loading iSCSI transport class v2.0-870. [ 4.996289] iscsi: registered transport (tcp) [ 5.012783] iscsi: registered transport (iser) [ 5.016085] Bluetooth: Core ver 2.22 [ 5.016639] NET: Registered protocol family 31 [ 5.016640] Bluetooth: HCI device and connection manager initialized [ 5.016642] Bluetooth: HCI socket layer initialized [ 5.016649] Bluetooth: L2CAP socket layer initialized [ 5.016653] Bluetooth: SCO socket layer initialized [ 5.048792] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.049233] Bluetooth: HCI UART driver ver 2.3 [ 5.049234] Bluetooth: HCI UART protocol H4 registered [ 5.049235] Bluetooth: HCI UART protocol BCSP registered [ 5.049243] Bluetooth: HCI UART protocol LL registered [ 5.049243] Bluetooth: HCI UART protocol ATH3K registered [ 5.049243] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.049257] Bluetooth: HCI UART protocol Intel registered [ 5.049264] Bluetooth: HCI UART protocol Broadcom registered [ 5.049265] Bluetooth: HCI UART protocol QCA registered [ 5.049265] Bluetooth: HCI UART protocol AG6XX registered [ 5.049265] Bluetooth: HCI UART protocol Marvell registered [ 5.050365] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 5.058402] usbcore: registered new interface driver btusb [ 5.062362] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 5.062363] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.062363] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.062364] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.062364] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.062364] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 5.093113] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.093743] intel_rapl: Found RAPL domain package [ 5.093743] intel_rapl: Found RAPL domain core [ 5.093744] intel_rapl: Found RAPL domain uncore [ 5.093745] intel_rapl: Found RAPL domain dram [ 5.120034] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.120035] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.120036] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.120036] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.120037] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 5.120037] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.120038] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 5.120039] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 5.120039] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 5.137921] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 5.137984] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 5.138032] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 5.138077] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 5.138114] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 5.138147] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 5.138175] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 5.138205] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 5.138232] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 5.138261] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 5.138293] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 5.138322] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 5.138351] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 5.169817] Bluetooth: hci0: BCM: chip id 63 [ 5.170817] Bluetooth: hci0: BCM: features 0x07 [ 5.186824] Bluetooth: hci0: BCM20702A [ 5.187818] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 5.188650] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2 [ 5.188651] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found [ 5.331615] usblp 1-10:1.0: usblp1: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x5C17 [ 5.331627] usbcore: registered new interface driver usblp [ 5.393828] Adding 48834556k swap on /dev/sda2. Priority:-1 extents:1 across:48834556k SSFS [ 5.923236] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 5.972514] audit: type=1400 audit(1513710539.725:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=994 comm="apparmor_parser" [ 5.972732] audit: type=1400 audit(1513710539.725:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=995 comm="apparmor_parser" [ 5.972954] audit: type=1400 audit(1513710539.726:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=996 comm="apparmor_parser" [ 5.973050] audit: type=1400 audit(1513710539.726:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3247/usr/lib/snapd/snap-confine" pid=990 comm="apparmor_parser" [ 5.973060] audit: type=1400 audit(1513710539.726:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3247/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=990 comm="apparmor_parser" [ 5.973631] audit: type=1400 audit(1513710539.726:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine" pid=991 comm="apparmor_parser" [ 5.973633] audit: type=1400 audit(1513710539.726:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=991 comm="apparmor_parser" [ 5.973634] audit: type=1400 audit(1513710539.726:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//snap_update_ns" pid=991 comm="apparmor_parser" [ 5.973657] audit: type=1400 audit(1513710539.726:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine" pid=992 comm="apparmor_parser" [ 5.973659] audit: type=1400 audit(1513710539.726:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=992 comm="apparmor_parser" [ 6.146144] new mount options do not match the existing superblock, will be ignored [ 6.176155] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 9.110506] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 9.110565] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 11.326462] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 11.326601] NFSD: starting 90-second grace period (net ffffffff967ec900) [ 11.568994] FS-Cache: Loaded [ 11.574360] FS-Cache: Netfs 'nfs' registered for caching [ 11.582435] NFS: Registering the id_resolver key type [ 11.582441] Key type id_resolver registered [ 11.582441] Key type id_legacy registered [ 677.319769] usb 1-2: USB disconnect, device number 2 [ 683.240445] usb 1-2: new high-speed USB device number 8 using xhci_hcd [ 683.381921] usb 1-2: New USB device found, idVendor=054c, idProduct=07c3 [ 683.381925] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 683.381928] usb 1-2: Product: ILCE-6000 [ 683.381931] usb 1-2: Manufacturer: Sony [ 683.381933] usb 1-2: SerialNumber: C9DBA06323CB [ 683.383099] usb-storage 1-2:1.0: USB Mass Storage device detected [ 683.383307] scsi host7: usb-storage 1-2:1.0 [ 683.397193] usbcore: registered new interface driver uas [ 684.398392] scsi 7:0:0:0: Direct-Access Sony DSC 1.00 PQ: 0 ANSI: 0 [ 684.399048] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 684.614185] sd 7:0:0:0: [sdc] 125337600 512-byte logical blocks: (64.2 GB/59.8 GiB) [ 684.616266] sd 7:0:0:0: [sdc] Write Protect is off [ 684.616271] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 684.616946] sd 7:0:0:0: [sdc] No Caching mode page found [ 684.616954] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 684.621377] sdc: sdc1 [ 684.623457] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 979.476707] usb 1-2: USB disconnect, device number 8 [ 983.846080] usb 1-2: new full-speed USB device number 9 using xhci_hcd [ 983.987230] usb 1-2: New USB device found, idVendor=054c, idProduct=0994 [ 983.987236] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 983.987240] usb 1-2: Product: USB Charger [ 983.987242] usb 1-2: Manufacturer: Sony [ 983.988334] input: Sony USB Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:054C:0994.0004/input/input20 [ 983.988595] hid-generic 0003:054C:0994.0004: input,hidraw3: USB HID v1.11 Device [Sony USB Charger] on usb-0000:00:14.0-2/input0 [ 990.064724] usb 1-2: USB disconnect, device number 9 [ 1414.462313] usb 1-2: new high-speed USB device number 10 using xhci_hcd [ 1414.604668] usb 1-2: New USB device found, idVendor=054c, idProduct=07c3 [ 1414.604673] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1414.604676] usb 1-2: Product: ILCE-6000 [ 1414.604678] usb 1-2: Manufacturer: Sony [ 1414.604681] usb 1-2: SerialNumber: C9DBA06323CB [ 1414.605963] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1414.606272] scsi host7: usb-storage 1-2:1.0 [ 1415.639821] scsi 7:0:0:0: Direct-Access Sony DSC 1.00 PQ: 0 ANSI: 0 [ 1415.640624] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 1415.957578] sd 7:0:0:0: [sdc] 125337600 512-byte logical blocks: (64.2 GB/59.8 GiB) [ 1415.958532] sd 7:0:0:0: [sdc] Write Protect is off [ 1415.958537] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 1415.959492] sd 7:0:0:0: [sdc] No Caching mode page found [ 1415.959500] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1415.964437] sdc: sdc1 [ 1415.967123] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 1483.304583] usb 1-2: USB disconnect, device number 10 [ 1487.111034] usb 1-2: new high-speed USB device number 11 using xhci_hcd [ 1487.252899] usb 1-2: New USB device found, idVendor=054c, idProduct=07c3 [ 1487.252906] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1487.252909] usb 1-2: Product: ILCE-6000 [ 1487.252912] usb 1-2: Manufacturer: Sony [ 1487.252914] usb 1-2: SerialNumber: C9DBA06323CB [ 1487.254120] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1487.254393] scsi host7: usb-storage 1-2:1.0 [ 1488.280484] scsi 7:0:0:0: Direct-Access Sony DSC 1.00 PQ: 0 ANSI: 0 [ 1488.281303] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 1488.494255] sd 7:0:0:0: [sdc] 125337600 512-byte logical blocks: (64.2 GB/59.8 GiB) [ 1488.495054] sd 7:0:0:0: [sdc] Write Protect is off [ 1488.495061] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 1488.495975] sd 7:0:0:0: [sdc] No Caching mode page found [ 1488.495986] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1488.500981] sdc: sdc1 [ 1488.504524] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 1488.948818] usb 1-2: USB disconnect, device number 11 [ 1492.895077] usb 1-2: new full-speed USB device number 12 using xhci_hcd [ 1493.036227] usb 1-2: New USB device found, idVendor=054c, idProduct=0994 [ 1493.036231] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1493.036234] usb 1-2: Product: USB Charger [ 1493.036237] usb 1-2: Manufacturer: Sony [ 1493.037346] input: Sony USB Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:054C:0994.0005/input/input21 [ 1493.037532] hid-generic 0003:054C:0994.0005: input,hidraw3: USB HID v1.11 Device [Sony USB Charger] on usb-0000:00:14.0-2/input0 [ 1557.766953] usb 1-2: USB disconnect, device number 12 [ 1929.446053] usb 1-2: new high-speed USB device number 13 using xhci_hcd [ 1929.587787] usb 1-2: New USB device found, idVendor=054c, idProduct=07c3 [ 1929.587792] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1929.587795] usb 1-2: Product: ILCE-6000 [ 1929.587798] usb 1-2: Manufacturer: Sony [ 1929.587800] usb 1-2: SerialNumber: C9DBA06323CB [ 1929.589030] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1929.589339] scsi host7: usb-storage 1-2:1.0 [ 1930.619254] scsi 7:0:0:0: Direct-Access Sony DSC 1.00 PQ: 0 ANSI: 0 [ 1930.619977] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 1930.942588] sd 7:0:0:0: [sdc] 125337600 512-byte logical blocks: (64.2 GB/59.8 GiB) [ 1930.943281] sd 7:0:0:0: [sdc] Write Protect is off [ 1930.943286] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 1930.943900] sd 7:0:0:0: [sdc] No Caching mode page found [ 1930.943909] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1930.948024] sdc: sdc1 [ 1930.950368] sd 7:0:0:0: [sdc] Attached SCSI removable disk